Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,698 Posts
The Roller may be a better choice for the chain....Nothing to ware out as the nylon shoe does...

Bought a 61 CH years ago that came with a cracked trans shaft, so when I opened the primary up to pull the trans I found it had an aluminum roller in place of the tensioner shoe. I pulled it all apart and the roller beat the chain to shit on the outside of the plates so badly to where the chain would stand up on it's own. I wouldn't recommend a roller if they're still made out of aluminum.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top