[Richard D]

The time has come to buy risers for my Pan. Got some cool Z-bars, and I need to ditch the junk risers that are attaching them to my Jammer springer, 1/2-20 thread. Might even go with brass. From the old cats that were around "way back when", to the young bucks who seem to have luck scoring cool old shit, give me some inspiration; sources wouldn't hurt, either.

 

[TheAppleKnocker]

 

[Larry T]

I'm pretty sure Paughco still sells the same risers they sold when they were a young company.

 

[elmiguel13]

Ive got these Paughco 5.5", 1/2 x 20 for sale if your into em, not sure they'll work on a springer. PM me if you want em.

 

[not45blesk]

made of conrods alloy ? ? ...

 

[348]

I've always wondered why 2" flanders dogbones are so expensive. Is there anyone repop'ing some cheaper ones?

 

[Richard D]

Those Paughco's will be just the ticket.

 

[hogster]

you will be unhappy with anything less than brass

 

[TheAppleKnocker]

Yup they are cast watch out for the taller ones the crack at the bottom

made of conrods alloy ? ? ...

 

[HD48FL]

I've always wondered why 2" flanders dogbones are so expensive. Is there anyone repop'ing some cheaper ones?

I can only assume because there weren't many of them made? There are still quite a few 3.5's and 4.0's that pop up for sale from time to time. Everytime I see a set of the 2" ones they always go for big bucks.

There is someone in Europe repopping them, forget which country but I seem to remember Sweden? They weren't exactly the same as the Flanders, but pretty close. Foget the price, but the guy was only doing them in small lots and they certainly weren't cheap either.

 

[JPP]

I can only assume because there weren't many of them made? There are still quite a few 3.5's and 4.0's that pop up for sale from time to time. Everytime I see a set of the 2" ones they always go for big bucks.

There is someone in Europe repopping them, forget which country but I seem to remember Sweden? They weren't exactly the same as the Flanders, but pretty close. Foget the price, but the guy was only doing them in small lots and they certainly weren't cheap either.

I think you mean these:

http://biphome.spray.se/mariette.stefan/

 

[HD48FL]

I think you mean these:

http://biphome.spray.se/mariette.stefan/

Thanks JPP, that was the original guy I had contacted after seeing his site. He wasn't making them and had given me a contact for someone else who was making them. They were just a bit different then the ones in the pictures, the clamp that goes to the top tree had the bolt going vertically, it wasn't like the originals or the ones pictured above.

 

[Lurkingclass]

No idea where to find another set of these English 'Palco' risers, but I'd like to find out more about them.

 

[Richard D]

Are those lower mounts on eccentrics?

 

[spent]

Never seen anything like those Palco's. Interesting.