Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
2,891 Posts
Ok Drake, i'll jump in. The hot off of the bat goes directly to the starter not the sol. 4 wires and one of them being the heavy wire going to the starter is going to be tough to get in there, 2 sugestions, 1- use a key switch that has a spring loaded start position (NAPA has a marine use one that I have used for years and works well), or 2- come off of the back side of the fuse between the bat and ing switch to power your relay.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.