Jockey Journal Forum banner
1 - 2 of 2 Posts

646 Posts
...KBG, I have an old pre unit and have plenty of oil in the top end
the problem with the old ones is with the leaks; imposible to stop them, normally on external oil pipes.
Thats opposite to me, I got no leaks but very little oil gets up there!
If you stone all the banjos flat and anneal the copper washers, and
use the black rocker gaskets with the metal in the middle yours
should'nt leak either.
If everything is flat that is.
How do you get plenty of oil up there, do you run a feed from the timing cover?
I have a 3/32 restriction and get 10 psi cold and so low you can,t read it hot.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.