Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,743 Posts
On my '55 generator pre unit Triumph race bike I have an iron head w/ eternal oil pipes. It doesn't leak at all. Wes (Four Aces) built the motor, just copper gaskets, I have had it apart a couple times, back together with same washers and no issues with leaks. I do have each rocker box vented. And yes, there is pressure there, run the bike with vented rocker caps and it is a steady and forceful exertion through each vent. I did not run a generator so made a block off plate and also vented from the crankcase additionally.

Tyler
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top