Jockey Journal Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
I have a 67 500 tiger. The front end came one side together and the other not. in the work shop manuel and the parts catalogue both show semilar pics with some differences.I don't have all the peices to biuld both.An I not sure from both pics what I should have and the tools do it with. Can someone look at the pic that I'm posting and get some help.Thanks!
 

Attachments

·
Registered
Joined
·
581 Posts
I am not certain I understand the question completly but I have a 66 T100 and it appears to be the same front end components. You should also have two internal springs and two tubes but the rest appars to be there.
 

·
Registered
Joined
·
581 Posts
jchatman said:
did you have to have a speacial tool to use to install the forks to the trees?
No not at all they slide into the trees no problem. Mine are out being cut and rethreaded right now I plan on replacing the seals and rebuildeng when they come back. Someone did a write up here a while back on this subject you may want to do a search and see if that info is helpful to you.
 
1 - 4 of 4 Posts
Top