Jockey Journal Forum banner

Triumph frame ID TR6 maybe?

2849 Views 6 Replies 5 Participants Last post by  BobAsh
4
I got this frame with a pickup load of random Harley parts. As much as I'd like to have a Triumph again, I already have too many projects and not enough time.

I can't find a serial # or VIN. Head casting is numbered F4610 with a "B" under that, upper rear is F4611 and lower rear casting is F4613. Google suggests it's a late-'60s/early-'70s TR6.

It looks unmolested to me.









And a few more at

http://s968.photobucket.com/albums/ae161/drdidlittle/Triumph Frame/

Doc
See less See more
1 - 7 of 7 Posts
Gotta be a 61 or 62 Triumph Frame. Duplex was only three years and 1060 had no lower top bracer bar. No way to tell TR6, T-Bird, Bonne, etc.

Oh yea, looks good with most if not all the stock lugs, might bring $100 to $300 on those fancy auction sites.
Cool, thanks!

The posts I found on the britishonly forum suggest that there should be a serial number on it somewhere. Any idea where I should look?


Doc
Wonder why someone welded up the fork lock? I'd scrape the paint on left side of the neck, should have a number. Maybe down a little on the left.
more than likely if no vin is located it is a replacement for the infamous 1960 duplex frame . possibly ?
Wonder why someone welded up the fork lock? I'd scrape the paint on left side of the neck, should have a number. Maybe down a little on the left.
It's not welded, if the threaded boss on the left side of the neck is the fork lock. There's a bolt stuck in it.



Doc
See less See more
Cool, thanks!

The posts I found on the britishonly forum suggest that there should be a serial number on it somewhere. Any idea where I should look?

Doc
Normally on the left side of the head tube.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top