Jockey Journal Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,123 Posts
Re: Triumph Trident Frame question

Talked to my mate today ,and when he used the triple frame(early trident) he had to fabricate new front engine mounts ,this was the only major change to take the 650 unit motor(750 morgo top end). He used spacers to get the correct engine off-set for rear chain alignment as the triple frame is wider, and he couldnt remember if the engine plates at the rear were a straight bolt on as he made custom ones anyway as it was built for show and go. Hope that helps
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top