Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
464 Posts
If you are going to run a single carb on a T100R bottom end or vice versa you will need to make sure the camshaft timing is set for that particular set up.
If this old brain remebers right, the T100R cam timing is set up to the dash mark on the cam gear and the T100C is set to the dot mark.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top