Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
258 Posts
Yeah that should work fine. Just be sure the rod doesn't turn in the cap as you torque on it.

I cut the top off an old cap and used some washers/nuts on 3/8" rod to do the pulling.

Cut some grooves into the cap so I can unscrew it after the tubes are pulled up tight.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top