Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
225 Posts
I´ve done of couple of separations,- impossible to save the tubes. A lot of them are pinned through the castings, as well. Cut and mill!
If modding´s your game, cut the tubes some distance from the casting, do what you have to do and weld the whole thing back together with inner slugs.
Mads
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top