[Hoges]

The 65/69 inner primary did not have a seal the sealed bearing is the seal. Go to Andrews site and it shows the 4 main shafts sizes. Also i fitted a BDL 3" electric start kit to a 74 trany . The Clutch hub is Alloy and cracked at the key way very thin there. Found out Zippers and others make a ring to press on to stop this.

 

[Hoges]

The primo kit posted above says 65/84 electric start but on a 65/69 the ring gear is positioned on the clutch shell further out. So a 70 on wont work unless you machine clutch shell

 

[Hoges]

The primo kit posted above says 65/84 electric start but on a 65/69 the ring gear is positioned on the clutch shell further out. So a 70 on wont work unless you machine clutch shell View attachment 274794

Here are some pics of what I've got, hope they might help. Here is a back shot of the clutch basket with the hub going into it. The hub has the roller bearing cage between it and the basket. Also, a pic of the tranny and engine cases, and the '74+ inner primary with the sealed roller. Heading over to the Andrews site now 👍 View attachment 274795
View attachment 274796

You have a stock clutch hub. And a 70 up main shaft from what i see. The bearing would be the double row cage type.

 

[Hoges]

Is this it?