Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
1,574 Posts
Irish Rich said:
Go here:

I know this is the panhead kit, but if you call them, they should fix you up with a taper shaft front pully for the kit, and the rest of the kit is the same from there on out. You can get an 1 1/2" kit.

I haven't been able to stump them yet on an oddball drive train combo for an electric starter kit, they always have the setup I need, and the parts are excellent.

Billy can get a little "rough" on the phone from time to time, but he's a good guy, and he knows his stuff.

Maybe vent the derby, and maybe the small inspection cover, but you should be OK at that with the tin primaries.
tech cycle has ALWAYS been good to me no matter what setup. i actually went there and they machined things for me on the spot to get things to work. even sent me home with extra parts in case 1 didnt work.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.