[bon]

I asked this over on britbike so i'll ask here too , i am rebuilding a set of norton roadholder front forks for a triton and wonder if anyone knows any modifications or upgrades for these forks ? Is there any way of improving the damping or bushes or anything else ?

Thanks.

 

[Necron99]

Progressive springs work wonders.
Are these external or internal spring forks? I run external long, single damped RH on my Norton and the problem I have is keeping fork seals in it. The springs rub on the for tubes, scratching them and leading to leaks.

 

[swooshdave]

http://www.accessnorton.com/lansdowne-fork-damper-kit-t4683.html

 

[bon]

I don't have springs yet so don't mind which ones i have to use, i heard of someone putting yamaha r1 dampers into norton forks ,

 

[pelican]

http://www.accessnorton.com/lansdowne-fork-damper-kit-t4683.html

this ^

but if you just want to do something on the cheap....plug the holes in the lower dampers, re-drill above the taper, use extended bronze bushes from rgm
item code 788....www.rgmmotors.co.uk/main.htm