Jockey Journal Forum banner
1 - 1 of 13 Posts

· Registered
92 Posts
The spacer that goes inbetween is octagon on the outside and a round hole in the middle for the axle. The bronze bushings in the middle are the brake shoes which are tapered. You are missing the brake actuating arms that when the cable is pulled pushes the bronze cones into the hub. It's pain in the ass to set up. Mine still isn't right
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.