Jockey Journal Forum banner

Narrow Flanders style bars, throttle, grips

4873 Views 0 Replies 1 Participant Last post by  Flathead4Ever
Sold, pending payment
For Sale: 1" narrow Flanders style bars. $45.00

These bars are made from 1/8 wall thickness tubing, and are super beefy. Approximate measurements are:

Overall width: 30"
Center width: 6"
Rise: 5 ¾"
Pullback: 7"

The bars are drilled for a stock springer horn button (could also be used as a magneto kill switch) on the right side, and a ¼" center hole on the bottom for the wire to exit. Included are the external throttle, brake handle, and those rad blue grips.

These bars came off my '38 Harley, and were set up for risers that threaded into the top of the fork tubes, with a VL-style top clamp.

The center width is too narrow for a standard Flanders-style triple clamp. I still have the top clamp and risers shown in the pic, for sale separately. This bar setup has a really clean, narrow look.

They were very comfortable, but I wanted to go back to internal throttle and spark advance.
See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.