Jockey Journal Forum banner
1 - 1 of 1 Posts

208 Posts
Discussion Starter · #1 ·
These are Thick fin trock jugs I bought years ago for a rainy day Ironhead build. These jugs are for 3 7/16" pistons. Actual bore is 3.425 (as they have never had pistons fitted to them!) Gasket to gasket length is 5.680". These will not just bolt up with out machining the cases, and relocating the head and cylinder studs.

See my original write up on the blog

Email me at [email protected] as I don't receive pm notifications from JJ and am not on here nearly enough any more...

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.