Jockey Journal Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
330 Posts
Discussion Starter · #1 ·
Made a seat for my bike, dyed it using some antique saddle tan liquid , took a couple of coats to get it even.One thing i learned was not to leave the leather overnight in the garage to dry (after shaping) as i came out the next day and it had started to mold. luckily, i called up the guys at Tandy and all that was required was a little soapy water to remove the small patches.

Jason
 

Attachments

· Registered
Joined
·
330 Posts
Discussion Starter · #8 ·
I created the pattern by using the a basket weave tool from Tandy, and it took me about two hours to tool. I could make you one if you wanted, but i would suggust trying it yourself, I bought some tools (of which all i used was the hammer and before mentioned basket weave tool) some dye and conditioner. With the cost of leather (get some scraps for practicing) about 40 bucks. I made the seat pan from .105 steel and the padding is a anti fatigue mat, that i shaped using a stanly mini plane (kinda like a chesse grater) Less my time it cost me around $55 to make the seat. Also thanks for the kind words and Fredo, if you don't have a triumph it will not fit as the front pivots on an axle in the side hack mount.

Jason
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top