Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
738 Posts
Tha Nutz said:
A taillight bracket made out of 18 gauge is like making one out of toilet paper. I would use 12 gauge, minimum.
Put enough creases and bends in it you might get it ridgid enough, but using a thicker steel would make sense, and probally be worth the efforts.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top