Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
440 Posts
Sounds a bit Barbaric, but one way I have skun this cat is too open the jaws on my big vice the distance I need the dimple to be (Soft jaws on would be best!). Mark the fender where you need the dimple to be, and lay the fender across the open jaws 90 degrees to the opening. Find an old socket just a hair larger than the fork tube your dimpling for, lay it on the fender parallel with the vice jaws and give it a whack with whatever instrument of hittin' stuff you have around (my preference being a dead blow hammer). It might take a couple of hits to get where you want it to be, but its a good start.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top