Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
884 Posts
Nappy said:
Cool. Thanks for the words of wisdom. I think I'll visit the local scrapyard and see if I can turn up any mandrel bent stuff. Then go from there.
Hit up the muffler shops for scrap. I made a set of pipes for an old Honda chop I had from shop pieces. Weld, grind down the weld and cover with high temp paint.

The thing on those HF benders is lube the adjustable rollers, so they roll. Might not kink on you, but you have to go really slow.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top