Jockey Journal Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
183 Posts
Discussion Starter · #1 ·
Bend some 1.25" O.D X .120" wall DOM mild steel tubing. Can anyone here from San Diego recommend a reputable shop that will bend tubing? I'm going to hard tail my Evo Sporty. After several emails, I'm going to use Lunatic's method of hardtailing a swing arm. Have everything but a tube bender, I've got blue prints to build one but that's another project. Thanks in advance.

Respectfully,
SDJose
 

· Registered
Joined
·
141 Posts
If you can wait a few weeks..I'm going to build a tube bender...then you can do it for free....

SDJose said:
Bend some 1.25" O.D X .120" wall DOM mild steel tubing. Can anyone here from San Diego recommend a reputable shop that will bend tubing? I'm going to hard tail my Evo Sporty. After several emails, I'm going to use Lunatic's method of hardtailing a swing arm. Have everything but a tube bender, I've got blue prints to build one but that's another project. Thanks in advance.

Respectfully,
SDJose
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top