Jockey Journal Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
991 Posts
I ran into the same problem....kinda. The trump had no lean what so ever when on the kick stand. I heated and bent it to give me the proper lean. Perfect.

then....

I took off the legs to shave and polish....I took apart the legs and found that whoever had the bike before me had cut the springs but failed to put spacers back in.....I put some back in and not only gave the frontend the proper feel but it raised the front up about 1.5" that was needed anyway. Now the angle of the lean on the stand was no good. So I had to fix it....again.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top