[HackAsaw]

They do look nice and it's amazing how much easier an invertor machine welds..... hell..... you just lay the fill wire down and let the pulse take care of the rest

oh......a good camera will focus as close as 4 inches

and I always like seeing the back sides of pretty stainless or aluminum beads

 

[HackAsaw]

and do be sure and post some pre-sander pix of that other rocker box when you get it welded........ some of those up close macro lens four inches away pix

it's very hard to tell from the picuture you posted if that weld is porous or not and those crappy castings aren't easy to do a text book perfect weld on.....