[belltown]

can anyone tell me what this fits?? its said to be a 1935 Harley vld rear fender, if anyone knows what it is let me know, thanks

 

[Buzz Kanter]

Drive chain cutaway is on the left so it is a Big Twin Harley. Could by VL or Knuck but I am not sure.

 

[ScreechingWeasel13]

Its from a rigid frame for sure. They used those up to about '57. But its VERY possible it came from a '34.

 

[flatman]

VL for sure, 1935-36 (can't remember if 1934 had this style also) Left side chain cut out=74 (or 36 80") has the tab up top that mounts for a VL (sigle loop frame) not like the 4 holes on 36 knuckle and up, that used those around the frame clamps. Also the bottom in the front is pinched in (like a 45) for the single loop style VL frame. it should have the tail light schroud on the flip piece . IMHO

 

[Rubone]

As Flatman says, it is VL. That type ran from '34-'36. It should have a tailight shroud though. The shroud was stock from '34-'38 on all models.
It appears to have been spliced from the vertical brace back. The rear braces are homemade and are backwards! The rear chainguard bracket missing, etc. The rear bracket should be riveted like the front one!
So it is basically half VL!!
Robbie