Jockey Journal Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
It looks like I have an off brand 74-77 FX style front caliper on my bike, and was wondering if someone with a similar setup can tell me if this looks normal. It seems to me that the pin that goes into the caliper, which the torque arm bracket slides on, is not pressed in all the way? Should the end of this pin be flush with the outer face of the caliper body? Thanks for any info!
Automotive tire Hood Automotive lighting Motor vehicle Bumper

Tire Wheel Automotive tire Hood Crankset
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #7 ·
Thanks for the info, guys! I have been running 25psi, but the weather has dropped like 10 degrees this week, so that might account for the tire.
I'm definitely planning on a multi-piston upgrade in the future. Pretty sure the front end isn't from the original bike, it might've got put on when they tried to convert from FX to FL, and then threw on a chrome aftermarket caliper for good measure. Definitely a Frankenbike, lol. Sorting it all out has been an adventure!
 
1 - 4 of 4 Posts
Top