Jockey Journal Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
294 Posts
Discussion Starter · #1 ·
I am rebuilding a Betor 35mm front end. Both of the seals were leeking when I got it. I mearured the oil that came out of each leg as I emptied them. One had 130ml and the other had 150ml. Any idea what the proper amount of oil is needed? Searched google some but nothing smart. The springs are still wet but the legs are dry (and shiny). Thanks,
Jakemon
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top