Jockey Journal Forum banner
1 - 4 of 4 Posts

·
Banned
Joined
·
700 Posts
I dont know how well they would work but a pair of linkert dc carbs would look pretty cool..
Cody!

They would work great, and look great if one were a hogged-out DC-2 with the bowl on the opposite side.

But the manifold bolt pattern is not the same as modern.

Personally, I think the ports should be closed a bit for the street anyway.

....Cotten
 

·
Banned
Joined
·
700 Posts
Cotten , can you tell me the bolt pattern on the dc 2,
Dinuns!

Off the top of my head,the DCs used 3/8" fasteners to the manifold, with the distance between centers a skosh bigger, just enough where the topic heads would need at least one hole moved, if they are the modern 5/16" hole spacing.

I have DCs at the shop to measure... but I don't know if I have anything modern to compare!

.....Cotten
 

Attachments

·
Banned
Joined
·
700 Posts
I had it reversed Folks;

DCs appear to be a nominal 2 11/16 inches between centers of 3/8" holes,
whereas an aluminum late-model manifold is a nominal 2 3/4 inches between centers for 5/16" holes.

....Cotten
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top