Jockey Journal Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
498 Posts
I've only got info on Connelly cam CSX1.
Intake 38/62 , exhaust 62/38 , 102 degree lobe centres. I assume that's measured at 0.020" tappet lift.
It uses 3/4" radius tappets, and valve clearances should be 0.010".
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top