Jockey Journal Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
91 Posts
Discussion Starter · #1 ·
I know this is a newer bike for this forum, but any help.

I picked up an 03 softail standard this summer. I heard some noise from the primary and found that my compensating bolt was hand tight. After some research I found out this was common for harley for some years. My question is should I torque to 140-150, because harley had a bullentin in 05 saying torque to 75 and then another 45 to 50 degree turn.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top