[chicoman7]

Ok I just put in new Brake lines with AN3 fittings. No matter what I do they seem to get twisted up when I tighen everything down. Any tips from anyone? I can't seem to do anything to avoid this.gggrrrrr

 

[Trent]

I responded on the swap board.
fuck

 

[chicoman7]

I tried that but i'll try harder

I responded on the swap board.
fuck

 

[Irish Rich]

Just tighten the nut until the fitting nipple just starts to engage the seat, then give the line itself a 1/3 turn to the left as you hold the line, then let the line straighten out as you tighten the nut from there.