[tom1969]

I recently bought a front wheel that came off of a 67 shovel. I want to see if this will fit my current front drum brake assembly on my panhead. i understand that I may need a different axle, spacer ect since the hubs are different. Is there anything else that I might need.

Thanks, Tom

 

[tom1969]

thanks for all the good info on this. I will do some more research and see what i can come up with parts. Thanks, for everyones help on this.

Tom

 

[tom1969]

My panhead is a conglomeration of parts. 1960 motor, 57 straightleg frame, and a hydraglide front end. The front rim was off of a 66-67 shovelhead. The front brake assembly however is a stock panhead. I wasn't sure if the drum and some of the hardware were compatable with the hub. But it sounds as though i got a few choices. What i may opt doing is to can the shovel wheel and go with an early star hub set up.