Jockey Journal Forum banner

Bay Area Triumph crankshaft repair?

1758 Views 4 Replies 4 Participants Last post by  Simon
I need to get the journals on a pre-unit 650 crank ground, a new rotor keyway cut in (180 degrees from current, it's boogered), and balanced. Anyone in Bay do this? Tried Bailey Bros and Eds Crankshaft already.
1 - 5 of 5 Posts
Raber's in SJ would know. Or.... you could call this guy and see if you can scoop up his crank for cheap. (Assuming this isn't you, of course)

http://sfbay.craigslist.org/sby/mcy/3221085341.html

Good luck, Bruno

Edit: Oops, it's a T100 carcass. My mistake!
Raber's ships them out, I think to Petaluma or American Canyon. I have a lead in Arizona, I just didn't want to ship a heavy crank.
Sammy Hale in AZ (formerly from CA) 702-326-7018
Wes @ Four Aces, but I didn't ask yet
Raber's ships them out, I think to Petaluma or American Canyon. I have a lead in Arizona, I just didn't want to ship a heavy crank.
Sammy Hale in AZ (formerly from CA) 702-326-7018
Wes @ Four Aces, but I didn't ask yet
Raber,s does indeed send their cranks out, but I think they have someone in the South Bay. If you're thinking they might send them to EDCO in Petaluma, they don't. EDCO referred me to Raber,s last year when I needed one ground. I ended up getting mine ground by an old time machine shop in Novato of all places, but I don't think they could help you with your keyway problem or balance it for you.

Eric
Barnaby Company in Santa Clara might be able to do it?
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top