Jockey Journal Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter · #1 ·
Hey guys, I'm wanting to swap out my stock oil tank (77 Ironhead) and due to the different locations of the breather/inlet/outlet lines I would need to swap the lines out for longer ones.

Anyone give me a little run down on what it takes, needs to be removed, etc.. In order to gain acces to the lines.

Thanks again
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top