Jockey Journal Forum banner

Any tricks to remove stripped bolt

3904 Views 25 Replies 19 Participants Last post by  Dicky
I have a stripped phillips head screw on the timing cover of my 72 Triumph. I have tried putting as much pressure as I can against it with no luck so far. Anyone have any helpful tips besides drilling it out and using an extractor. That will be my last resort. Thanks

1 - 1 of 26 Posts
atch, i use a flat punch and hammer, i like what you built!!
1 - 1 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.