Jockey Journal Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
285 Posts
Discussion Starter · #1 · (Edited)
Triumphs on here are getting to be as common as the model A sedan and coupe posts on the HAMB. Everyone is working on one.:)

I ground off all the extra castings on the fork clamps, made a headlight mount, and shaved the fork legs.

I had to spin the legs around for more room to adapt the dirt bike front hub (with speedo a speedo drive) and weld up the drain holes. I drilled and tapped new holes on the back of the legs.


And the mock up

________
ASexyEvilGirl
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top