Jockey Journal Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter · #1 · (Edited)
A clean shovel seen at a local show. There were about 50 other bikes, a couple mega buck ones with the big rear tires, rockets, and a '48 Nimbus from Denmark (unfortunately no pics taken).

The Nimbus was an inline 4 cyl job, the rocker arms/valve springs are exposed. Shaft driven. The frame rails looked like 1/8" x 1" rectangular in cross section steel bars.
 

·
Registered
Joined
·
117 Posts
mikes51 said:
A clean shovel seen at a local show. There were about 50 other bikes, a couple mega buck ones with the big rear tires, rockets, and a '48 Nimbus from Denmark (unfortunately no pics taken).

The Nimbus was an inline 4 cyl job, the rocker arms/valve springs are exposed. Shaft driven. The frame rails looked like 1/8" x 1" rectangular in cross section steel bars.
The Nimbus was made by Fisker & Nielsen and their are more know at least in Sweden by their excellent vacuum cleaner, Nilfisk.
You can find more here
http://www.allitnil.df.lth.se/nimbus/eindex.htm
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top