Jockey Journal Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
351 Posts
Discussion Starter · #1 ·
I don't get many opportunity to work on these jewels so I certainly don't want make any mistakes. The victim/patient is a '58 with thrashed exhaust spigots that an expert welder repaired. I'm cleaning and chasing in preparation for reassembly, and I found a loose helicoil insert for one rocker arm stud and one other loose stud. So?.......does one replace the loose insert w/a helicoil/timesert/keensert ,and "glue"/loctite the other stud back in the head or are more drastic/permanent measures called for? Inquiring minds would like to know. Thank you! TK.
 

·
Registered
Joined
·
351 Posts
Discussion Starter · #5 ·
. . . and you get 10 points for the way your "name" ties in to the question, it must have taken allot of planning . . . sic
OGB.........I didn't choose it. It was bestowed upon me years ago by another forum/board. :rolleyes:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top