| City | Seaford |
| State | NY |
| Price | $6800 |
I have too many projects going right now and not enough room so Im putting this up for sale
this bike is basically finished just needs some paint for the frame and rear fender
everything on this bike is brand new or newly rebuilt
bike is built off of a stock pre 1970 ironhead frame with a 4" stretch in the hardtail
everything on the bike is 100% tig welded
74" stroker motor
early S&S flywheels, S&S rods, S&S pistons
the motor just had a complete top end rebuild to include fresh cylinder hone, new piston rings, fresh competition 3 angle valve job, some mild porting done to the cylinder heads
right now the motor has a set of P cams installed
I do have 3 Sifton Barracuda cams that will go with the bike (missing the front cylinder exhaust cam)
Magento was just completely rebuilt to include brand new coil, points, and condensor, new accel plug wires, the mag has a tumbler and key which work great
Magneto also has a morris MRA kit installed with Morris clear cap
http://www.morrismagneto.com/mra.htm
Completely rebuilt CV carb built and specd for this motor
Factory Harley Honey Comb air filter
Trans shifts smoothly
has brand new Alto wet/dry clutches installed
kicker assembly was completely rebuilt to include new heavy duty kicker shaft
new factory OEM kicker shaft and made in the USA kicker bushing
wheels are completely brand new all new bearings and seals
Hubs and Rims are powder coated black with brand new chrom spokes
21" front 16" rear
rear factory mechanical drum brake
front has 1974-1977 "Pie Slice caliper with brand new stainless brake rotor
Brand new rear chain
front end is a 1974-1977 style 35mm setup
fork tubes were cut to -2 by forking by frank,
has all new seals and internals
fork legs were shaved and smoothed and powdercoated black along with the upper and lower trees
custom stainless 1" T bars with Biltwell Kung Fu grips and stock late model HD controls with brand new custom length throttle cable and custom length clutch cable
custom headlight bracket
custom 2 into 1 exhaust
custom sissybar with LED tail light
Lepera Baron rigid mount chopper seat
custom narrow frisco sportster tank painted with PPG black and 6 coats of clear the gas tank looks like a mirror
Im sure Im leaving a lot of stuff out but the bike is honestly completely built from the ground up and will be a very fast bike
the motor sounds and feels extremely strong and the bike is very very light
pics are below its raining out right now so I will get some better pics up in a few days
the bike has a clean NY transferrable registration in my name (in NY anything pre 1974 has a transferrable registration not a title)
looking for $6800 or best offer
I will help with delivery if your are not local
bike is located on Long Island NY a little outside of NYC
more pics of the build for the bike can be seen at my site at
www.syndicatechops.blogspot.com
I am not a big shop or anything I just build bikes out of my garage by myself
video of the bike when I first got it running
I will post a newer video of the bike running sometime this week
you can contact me at
[email protected] or send me a pm and I will give you my phone number to reach me at
