Jockey Journal Forum banner

tech

  1. Tech Archives
    So your old OR new monoblock is spilling gas when tickled, or generally flooding? When you tap the bowl it stops, but you've inspected the needle, seat, and float and see no visible problem? Here is the likely culprit..... This was on a brand new monoblock, but the same issue can happen on...
  2. The Board
    So your old OR new monoblock is spilling gas when tickled, or generally flooding? When you tap the bowl it stops, but you've inspected the needle, seat, and float and see no visible problem? Here is the likely culprit..... This was on a brand new monoblock, but the same issue can happen on...
  3. The Board
    I have admired these Crafty-B caps for a long time, put off a bit by the price but also by the fact they don't come with any install info. So when one of my clients wanted one on his bike, I figured there as no time like the present to figure out to install one. There are probably a hundred ways...
  4. Tech Archives
    By request, some tech on upgrading the fider/fibre gear on Lucas auto advance drive gear to steel. Yes, you can use a solid (non-auto-advance) gear. Yes, you can use alloy instead of steel. yes, you can go back with a fiber gear. But, if you change your gear out to steel, there are several...
  5. The Board
    By request, some tech on upgrading the fider/fibre gear on Lucas auto advance drive gear to steel. Yes, you can use a solid (non-auto-advance) gear. Yes, you can use alloy instead of steel. yes, you can go back with a fiber gear. But, if you change your gear out to steel, there are several...
  6. The Board
    Almost every old Triumph I work on has had the crap beaten out of the rocker shafts, at least the end with the o-ring. Here is a way to get out those ancient, frozen, rocker shafts without the use of a hammer. I'm not the first to do it this way, but I've not seen a thread here on it either...
  7. The Board
    Just like the old days, a tech post. I got into a hurry with my mockup and made a huge mistake, I grabbed the crappy standard BDL nut for the crank pulley and cross-threaded it onto the crank. My motor was rebuilt and other than dyno pulls had never been run so the thought of having to have it...
  8. The Board
    this may be a little OT, I'm not sure how year-strict you guys are, just let me know... I'm looking for a kickstart conversion for my 07 sportster, I feel like a fink everytime I press the electric start. I cant seem to find any for newer sportsters. Anyone know where I can get one? thanks
  9. The Board
    http://www.jockeyjournal.com/forum/forumdisplay.php?f=5 A thread with lookup-references for engine/frame numbers of our most common bikes. And a good tech article re tuning Brit carbs, in the second thread. . Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for...
Top