New here but not to chopping - The Jockey Journal Board

Go Back   The Jockey Journal Board > General Discussion > New? Introduce yourself here!

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-09-2019, 10:43 AM   #1
BSATOM
Junior Member
 
Join Date: Nov 2019
Location: Nor Cal Coast
Posts: 4
Default New here but not to chopping

Hi folks. Tom here. Been building bikes for 20 years. Started with a 1967 BSA Lightning
that had been chopped in 1979 and stored since then. I got it for $800 and it still had an Arco rear tire on it. Then I build various other Brit bikes until I was offered a 1969 XLCH magneto Sporty. Now I was in the Harley world. Since then I have built from bare cases...a 1938 ULH chop...a 1967 FLH chop...a 1972 sawed off Sportster with 86cid Trock Shovester setup in a 1970's Denvers chassis....several stroked flathead 45 chops with Sportster oil pumps and either a Norton Atlas/Commando AMC gearbox or a Harley 4 speed. Several sawed of Sportsters made from cases with repeatedly blown and welded trans or primary areas. ( I like "sawed off Sportster" and dislike the terms "divorced Sportster" and "shortster". The heavy duty machine work mods are coming on, as I have acquired a 1943 Hendey 12x30 lathe and a 1954 Bridgeport round ram J head mill. Cut to ten years later and I am still chopping away. Just finished a 45 chop that was done in the 1960's and taken apart and stored in 1978. A 40 year time capsule. And as life goes on.....the sparks will fly in my garage. Here are some pics. All are not chops. I cut and welded on several of the bikes thus changing their geometry from the way they were manufactured. My take on chopping and choppers...The long Denvers Shovester pictured is not a chop, as it has not been modified from the way it was manufactured. It is a long custom, just like all the WCC and OCC bikes are. Just like a Sugar Bear build. Not a chopper, but a custom manufacture. I un chopped the Knucklehead frame back to blueprint specs. Pics are... 1) Trock Shovester with sawed off 1972 cases and a 1970's Denvers frame and fork. 2) 2003 Buell XB9 engine in a highly chopped 1989 Sportster frame with V-Rod rear wheel and 70s Sportster front end. 3) 1938 ULH 80" flathead in a Santee frame with Ceriani forks, 7/8 Flanders bars and hydraulic steering damper like Indian Larry did. 4) The same 1938 ULH and Santee frame and Ceriani forks redone in an older flavor after I sold it to a friend. 5) A sawed of 1957 first year Sportster with Dytch 3 3/8 cyls and 4 3/4 stroke = 85 CID (over 50% displacement increase from the stock 55CID engine) 6) My friends 1938 Knucklehead EL with turned down 74 flywheels. Correct 1938 frame, fork,trans and engine. Has a S&S carb, auto advance timer, belt drive and foot shift. A period bobber with modern real world upgrades for actual riding. Last pic is a sawed off Sportster in a highly chopped Demons Cycle Softail frame. I do all work from welding to spraying the paint and everything else. One man builds. I let my friend do the valve jobs and cylinder boring though.....he has better tools for that.
Attached Thumbnails
Click image for larger version

Name:	PaintedShovester002.jpg
Views:	8
Size:	148.9 KB
ID:	255588   Click image for larger version

Name:	GUNSAFE AND MACHINES 095.jpg
Views:	6
Size:	801.4 KB
ID:	255590   Click image for larger version

Name:	my pics old 280.jpg
Views:	8
Size:	195.8 KB
ID:	255592  

Click image for larger version

Name:	1938ULH Harley Davidson Flathead 80CID 046.jpg
Views:	9
Size:	328.6 KB
ID:	255594   Click image for larger version

Name:	1957 Sportster CHOPPER 032.jpg
Views:	6
Size:	354.7 KB
ID:	255596   Click image for larger version

Name:	DSCF6918.jpg
Views:	9
Size:	1,002.3 KB
ID:	255598  

Click image for larger version

Name:	DSCF6976.jpg
Views:	8
Size:	1.00 MB
ID:	255600  

Last edited by BSATOM; 11-12-2019 at 10:09 PM.
BSATOM is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-09-2019, 07:10 PM   #2
rhysmort
Senior Member
 
rhysmort's Avatar
 
Join Date: Jan 2016
Location: UK
Posts: 1,325
Default Re: New here but not to chopping

Welcome Tom!

Some killer bikes there sir!! love the flatty's! good to have you.
rhysmort is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:57 AM.