CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc.. - The Jockey Journal Board

Go Back   The Jockey Journal Board > The Jockey Journal Marketplace > Jock Shops

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-26-2008, 03:03 PM   #1
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Offering custom stainless steel chopper bars, select NOS chopper goodies, heavy gauge steel fenders, points covers, custom sissybars, etc.
Some items listed are stocked items, while some are one-offs.. all bars are available in raw or polished finish.

I use only quality USA made type 304 or 316 stainless steel tubing and plate for my bars; they will never rust or flake, and any imperfections can always be polished out.

Please pm for any info...... thanks for looking.

*all of my prices are less shipping.

Standard 9.5" Johnny Chop style bars: 125.00 ea.

A pair on Vodoo's bike..

Standard 9.5" T-Bars: 115.00 ea.

A pair on El Krapp's bike:
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 12-24-2008 at 05:17 PM. Reason: add info
itusedtobeaboutchoppers is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-27-2008, 02:56 PM   #2
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Holy Bars (Bananas) All T316 w/ 3/16" laser cut side plates and 11 ga. tubing, 6" height, 6.5" center with 6" bar ends: 195.00 polished, 175.00 raw, or I offer a "builders kit" for these which includes 2 sideplates, 1 center section, and both bar ends; you tig or customize to your specs: 100.00 (kit)




Colored plexi points covers for Shovel, Evo BT, and Ironheads: 12.99 ea. (specify color)
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 07-27-2008, 03:14 PM   #3
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Stainless Drag Bars in 1" or 7/8": 35.00 for 1" polished, 25.00 for 1" raw. 30.00 for 7/8" polished, 20.00 for 7/8" raw . (shown)


NOS 6" Z-bars. These are standard triple plated chrome Z's, Made in America (!), from a buyout of an indy shop... I have a very limited number of these left. 65.00 ea. (shipped new in plastic)(ALL SOLD)
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 08-09-2009 at 08:08 PM. Reason: sold items
itusedtobeaboutchoppers is offline   Reply With Quote
 
Old 07-27-2008, 03:22 PM   #4
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Builders tank/fender mounting Bungs... all come with SS 5/16" allen bolt. 5.00 ea. (any style) Tank bung on left side of pic..


NOS Cal Cycle cast aluminum footpegs. (Anderson copies). Cal Cycle was a division of Cal Products; an aftermarket car/bike parts company that was founded in 1974. I only have a few pr. of these high quality footpegs left: 45.00 pr. (ALL SOLD!)

__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 11-28-2008 at 10:27 AM. Reason: sold items
itusedtobeaboutchoppers is offline   Reply With Quote
Old 07-28-2008, 10:20 AM   #5
abes
Junior Member
 
abes's Avatar
 
Join Date: Apr 2008
Location: Hunters Point, SF
Posts: 26
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Do you have those z bars in 7/8?
__________________
bid-ness socks.
abes is offline   Reply With Quote
Old 07-28-2008, 10:45 AM   #6
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Sorry; 1" only on the Z's..
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 07-31-2008, 06:18 PM   #7
cribhenny
Member
 
cribhenny's Avatar
 
Join Date: Jul 2007
Location: spokane, WA
Posts: 83
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

those "holy bars" repops you made give me a chubby! nice job!
__________________
ummm... are you talking?
cribhenny is offline   Reply With Quote
Old 08-01-2008, 12:42 AM   #8
Luke Nosewalker
Senior Member
 
Luke Nosewalker's Avatar
 
Join Date: Jun 2005
Location: StL
Posts: 2,383
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Do you make peaked fenders that hug a 200 rear?
Luke Nosewalker is offline   Reply With Quote
Old 08-03-2008, 06:08 AM   #9
Dozer
Senior Member
 
Dozer's Avatar
 
Join Date: Mar 2007
Location: Clarksville, TN
Posts: 224
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Hey man, do the Holy Bars come in 7/8 and 1 inch?
__________________
Honey get the shotgun, send the girls to the machinegun nest. Damned liberals are here for my guns..........
Dozer is offline   Reply With Quote
Old 08-04-2008, 03:12 PM   #10
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Quote:
Originally Posted by Dozer View Post
Hey man, do the Holy Bars come in 7/8 and 1 inch?
I only have centers/ends for 1" now; but plan on doing some 7/8" in the near future..
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-04-2008, 03:13 PM   #11
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Chad: get in touch w/me re your fender!
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-05-2008, 04:31 PM   #12
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Quote:
Originally Posted by Luke Nosewalker View Post
Do you make peaked fenders that hug a 200 rear?
Sure... check your pms... 100+. thanks!
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-11-2008, 04:47 PM   #13
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

FS: T304 stainless "Rabbit Ear" bars. 25 3/4" wide, 7 1/4" height, 6 1/4" center section (for stock HD risers). Capped ends; polished. 145.00 + SH.

__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-11-2008, 04:53 PM   #14
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..



FS: Tall, narrow Johnny Chops. All T316 11ga. stainless, 1" OD, 18 1/2" wide, 9 3/4" height, 4 1/2" center, 2" pullback. Fits stock HD 3.5" trees. Takes stock 1/2" X 13 riser bolts. Polished. 135.00 + SH. (SOLD)

__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 09-08-2008 at 06:00 PM. Reason: sold
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-11-2008, 04:58 PM   #15
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

FS: Shorty Johnny Chops. All T316 11ga. stainless. 19 1/2" wide, 5" height, 5" center section, 2" pullback. 1" OD. Standard 3.5 HD center spacing; takes stock 1/2" X 13 riser bolts. Polished. 125.00 + SH. (SOLD)

__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 09-08-2008 at 05:57 PM. Reason: sold
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-11-2008, 05:05 PM   #16
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

FS: Mid Johnny Chops w/ collars. All T316 11 ga. stainless, 1" OD, 19 1/2" wide, 6" height, 5" center section, 2" pullback. Standard 3.5" HD center spacing; takes stock 1/2" X 13 riser bolts. Quick polish job. 135.00 + SH. (SOLD)


__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 09-08-2008 at 05:50 PM. Reason: sold
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-11-2008, 07:56 PM   #17
cdgarg
Junior Member
 
cdgarg's Avatar
 
Join Date: Jul 2008
Location: seattle
Posts: 14
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Just received a ribbed fender from this guy. Fender looks great, can't believe how fast I received it. Definitely wouldn't hesitate to do business again. Thanks man.
cdgarg is offline   Reply With Quote
Old 08-11-2008, 09:14 PM   #18
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Quote:
Originally Posted by cdgarg View Post
Just received a ribbed fender from this guy. Fender looks great, can't believe how fast I received it. Definitely wouldn't hesitate to do business again. Thanks man.
Thank you; glad you dig it.
__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn
itusedtobeaboutchoppers is offline   Reply With Quote
Old 08-25-2008, 11:33 AM   #19
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

Some new "Holy Bars" available now... heavy 11 ga. T316 polished stainless steel. No shitty chrome plating that will look like ass after a year or two...(or the first time you unclamp them from the risers!) Super narrow; will fit stock HD trees with individual risers. * 1 PAIR LEFT... 195. + SH *



__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 09-08-2008 at 06:01 PM. Reason: add info
itusedtobeaboutchoppers is offline   Reply With Quote
Old 09-08-2008, 05:54 PM   #20
itusedtobeaboutchoppers
Senior Member
 
itusedtobeaboutchoppers's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 1,937
Default Re: CycleDelic Cycles : Kustom stainless bars, T-bars, Z's,etc..

FS: 1" O.D., 17" wide, 7.5" tall, 6.25" grip ends... heavy 11ga T316 stainless. Fits standard HD trees. Polished. 115.00 + SH. (SOLD)

__________________
"Metal damage, brain damage, you should see the damage, Bronze...." - Nightrider

Facebook: http://www.facebook.com/pages/Rigid-...90?ref=tn_tnmn

Last edited by itusedtobeaboutchoppers; 09-13-2008 at 10:51 AM. Reason: sold
itusedtobeaboutchoppers is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 PM.