Jockey Journal Forum banner

1957 Sportster hardtailed chopper

6K views 1 reply 1 participant last post by  ELpolacko 
#1 ·
CityPhoenix
StateAZ
Price$4000
Time to go, need the $ to build my pan project.

No expense spared on the engine build, all 57 or 58 casting dates. Stock flywheels, new pins, reconditioned rods, forged pistons, Kibblewhite "black diamond" valves, premium springs etc. Andrews Y grind cams, new lifters, pushrod tubes etc.

Case had the typical crack in the trans and was repaired and sleeved to prevent any further damage. New trans, clutch, primary chain etc.

Custom oil tank, widened Triumph rear fender with an internal strut. Early tank with a rib rolled in to match the rear fender.

Paughco narrow springer 2" over. Neat little chromed bits, battery box, stock oil cap and filter cartridge holder, brackets and tabs. Stock distributor is chromed and rebuilt. Comes with an early Mag that does work and an auto advance distributor with the tach drive in the cap. Linkert DC-10 carb with brand new rebuild kit and other stuff to finish the build.

Needs pipes, wiring and little else.





Email me at ELpollacko @ Gmail . com or give me a call 602 885 1522

Steve
 
See less See more
2
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top