|01-23-2012, 12:36 AM||#1|
Join Date: Jun 2009
Location: Kent, WA
Narrow Flanders style bars, throttle, grips
Sold, pending payment
For Sale: 1” narrow Flanders style bars. $45.00
These bars are made from 1/8 wall thickness tubing, and are super beefy. Approximate measurements are:
Overall width: 30”
Center width: 6”
Rise: 5 ¾”
The bars are drilled for a stock springer horn button (could also be used as a magneto kill switch) on the right side, and a ¼” center hole on the bottom for the wire to exit. Included are the external throttle, brake handle, and those rad blue grips.
These bars came off my ’38 Harley, and were set up for risers that threaded into the top of the fork tubes, with a VL-style top clamp.
The center width is too narrow for a standard Flanders-style triple clamp. I still have the top clamp and risers shown in the pic, for sale separately. This bar setup has a really clean, narrow look.
They were very comfortable, but I wanted to go back to internal throttle and spark advance.
Last edited by Flathead4Ever; 01-23-2012 at 10:28 PM.
|handlebars, harley, risers, springer|
|Thread Tools||Search this Thread|