Home made workshop tools - Page 14 - The Jockey Journal Board

Go Back   The Jockey Journal Board > General Discussion > The Board

Reply
 
Thread Tools Search this Thread Display Modes
Old 12-28-2013, 02:37 PM   #261
supercrouton
Senior Member
 
supercrouton's Avatar
 
Join Date: Mar 2009
Location: North Mississippi
Posts: 2,035
Default Re: Home made workshop tools

Here is a bit I whipped up to speed a little production project I had. It is three 1/4" slabs of aluminum, welded together, then die grinded back down. Then I turned both sides to true it back up.



It acts as a stop for small stock, and allows consistent lengths to be cut.


I had to make eight of these, and they had to be exactly the same overall and shoulder length. It's not motorcycle related, but you get the general idea of the potential.


The end products were glued to a slab of 1/2" thick glass, and located the glass to the steel structure through 1/2" holes, to complete this art table for my wife and son to work on.


__________________
If you were to take out someone's small intestines, and stretch it all the way out end to end, you'd go to jail.



Angry Monkey Motorcycles official website
supercrouton is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-28-2013, 03:26 PM   #262
F.St.M.
Senior Member
 
F.St.M.'s Avatar
 
Join Date: Jul 2007
Location: The mountains of NY
Posts: 655
Default Re: Home made workshop tools

Quote:
Originally Posted by Dr. Benway View Post
RidingHood inspired me, so I made a little forge from stuff I had around. It even has some Triumph parts on it...

Never mind the Triumph parts Paul, you've got Trent Reznor in there!!


F.St.M. is offline   Reply With Quote
Old 12-28-2013, 03:29 PM   #263
Dr. Benway
Mod Squad
 
Dr. Benway's Avatar
 
Join Date: Feb 2007
Location: Northeast US
Posts: 6,351
Default Re: Home made workshop tools

Oh man, too bad it wasn't the virgin Mary, I coulda taken it on tour thru the Bible Belt!
Dr. Benway is offline   Reply With Quote
 
Old 12-28-2013, 08:49 PM   #264
little d
Senior Member
 
little d's Avatar
 
Join Date: Dec 2007
Location: midwest
Posts: 2,905
Default Re: Home made workshop tools

Did ya bang a knife out?
__________________
"Apparently, any asshole can wrench on a newish, un-fuckered bike. Takes a goddamn genius to take this shit on."-Liam.
little d is offline   Reply With Quote
Old 12-29-2013, 03:21 PM   #265
dhallilama
Senior Member
 
dhallilama's Avatar
 
Join Date: Nov 2008
Location: portland, or
Posts: 837
Default Re: Home made workshop tools

Quote:
Originally Posted by Dr. Benway View Post
RidingHood inspired me, so I made a little forge from stuff I had around. It even has some Triumph parts on it...

Right now I have a simple exhaust bend brazed to the bottom with a blower on the end to stoke the fire. I have to figure out better fuel (charcoal is fine just for messing around) but it got that wrench up to yellow heat pretty quickly. I can see a bigger setup coming already...

careful; forges are addictive. once you make one big enough that you seriously start considering if it'd be better moved closer to the neighbor's house so your house will be safer, then it gets really fun

i've had charcoal fired, natural gas (didn't work as well as i'd hoped, but it was clean), propane & now cobbling together a waste oil fired forge... using a pump from an oil furnace.
dhallilama is offline   Reply With Quote
Old 12-29-2013, 03:35 PM   #266
Dr. Benway
Mod Squad
 
Dr. Benway's Avatar
 
Join Date: Feb 2007
Location: Northeast US
Posts: 6,351
Default Re: Home made workshop tools

Yeahp, the wheels are already turning for a bigger (maybe propane) version...
Dr. Benway is offline   Reply With Quote
Old 12-29-2013, 10:08 PM   #267
Richard D
Senior Member
 
Richard D's Avatar
 
Join Date: Mar 2007
Location: Texas City, TX
Posts: 1,380
Send a message via Yahoo to Richard D
Default Re: Home made workshop tools

Quote:
Originally Posted by supercrouton View Post


It acts as a stop for small stock, and allows consistent lengths to be cut.



Good idea, I need to cut and face a bunch of short fat pieces.
Richard D is offline   Reply With Quote
Old 12-30-2013, 01:25 PM   #268
supercrouton
Senior Member
 
supercrouton's Avatar
 
Join Date: Mar 2009
Location: North Mississippi
Posts: 2,035
Default Re: Home made workshop tools

Quote:
Originally Posted by Richard D View Post
Good idea, I need to cut and face a bunch of short fat pieces.
Yep, that little item can speed things like this along nicely, and give a consistent result...
__________________
If you were to take out someone's small intestines, and stretch it all the way out end to end, you'd go to jail.



Angry Monkey Motorcycles official website
supercrouton is offline   Reply With Quote
Old 12-30-2013, 03:05 PM   #269
Rem
Senior Member
 
Rem's Avatar
 
Join Date: Mar 2013
Location: Oxford, UK
Posts: 504
Default Re: Home made workshop tools

Quote:
Originally Posted by supercrouton View Post
Yep, that little item can speed things like this along nicely, and give a consistent result...
Yeah, that's a neat idea. Beats using a piece of flat stock to get close, then tapping the workpiece around to get it square in the chuck!
Rem is offline   Reply With Quote
Old 01-10-2014, 12:44 AM   #270
supercrouton
Senior Member
 
supercrouton's Avatar
 
Join Date: Mar 2009
Location: North Mississippi
Posts: 2,035
Default Re: Home made workshop tools

Am I the only one that thinks it's a pain to install a new seal than reinstall the drive-side outer race into a K2FC magneto? The seal has a steel core, the bearing race is steel, the mag is lined with two strong magnets on either side and is too deep for a man's hands. Add to that, the race is held into the mag body with paper crush thingy. Aligning all that crap and fighting the magnets on the way down is, well, an exercise in futility at best. Here is something mostly non-ferrous I made to make this a two minute job.



Drop the seal in first, with some sealant around the outer edge like this


Set in the paper spacer, then in with the outer race. At this point, you can't get it wrong.


Tap the race in with a mallet and .....Bam! You're done! Easy!
__________________
If you were to take out someone's small intestines, and stretch it all the way out end to end, you'd go to jail.



Angry Monkey Motorcycles official website
supercrouton is offline   Reply With Quote
Old 01-11-2014, 01:56 PM   #271
knuckleworks
Senior Member
 
knuckleworks's Avatar
 
Join Date: Nov 2010
Location: sweden/kristinehamn/wärmland
Posts: 790
Default Re: Home made workshop tools

thats nice Dan

well most cool guys have ace of spades on their stuff and i thought i could try to be cool to (haha)
some imagination,8mm roundbar,weld and voila,i got 2 pedals and a stand for my shrinker/stretcher tools just return springs and paint and it will do




__________________
uıɐƃɐ ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq ɹǝʌǝu ןן,ı

Lex Talionis
R I P Tippo 110426 my best friend for 13 years,you're missed
knuckleworks is offline   Reply With Quote
Old 02-05-2014, 05:58 PM   #272
old.wrench
Senior Member
 
old.wrench's Avatar
 
Join Date: Dec 2008
Location: corner of walk and don't walk
Posts: 1,719
Default Re: Home made workshop tools

I've got an n.o.s. Wassell fender that I picked up at the Wauseon meet a few years ago that I want to use on a Panhead build. The problem with the fender is that it was made to too large of a radius to fit nicely on my tire, even though it's a fairly large diameter Firestone Deluxe Champion 4.50x18. I was going to tighten up the radius by using the old lever method with a couple pieces of 2x4 but anyone who has ever done that knows that the fender wants to "squirt" away from you when you start applying force. So, I rounded up some scrap steel I had and bolted and welded some pieces together to come up with a tool that does a hell of a job. It's adjustable for fender width and fender sidewall height. It traps the fender in place and allows you to make even and precise adjustments. The "shoes" that contact the fender are made out of hardwood, they are adjustable and replaceable and you can make them any shape you want to match the profile of the fender. I'll add a compression spring fitted between the handles (one of these days when I come across one) to make it a little easier to use (those little springs you see between the "shoes" don't do anything, they're just the springs attached to the uni-strut nuts). The friggin thing works way better than I anticipated .











Geo.
__________________
"it ain't rocket surgery"

"hony swacky mally asbestos"


old.wrench is offline   Reply With Quote
Old 02-06-2014, 01:33 AM   #273
Uuh...
Senior Member
 
Uuh...'s Avatar
 
Join Date: Oct 2007
Location: Rotterdam, Netherlands
Posts: 119
Default Re: Home made workshop tools

Thanks for sharing that old.wrench!
I really like it when a home-made DIY tools get developed into something more professional looking/working.
__________________
Build, make, create and inspire. Thinking is for when you are confronted with a problem. - Selectedgrub
Uuh... is offline   Reply With Quote
Old 02-10-2014, 12:08 PM   #274
Lester
Senior Member
 
Lester's Avatar
 
Join Date: Nov 2012
Location: Norway
Posts: 1,559
Default Re: Home made workshop tools

Hey guys....

I agree with the post above, my hat goes off to the guys who take the time to not only build but also Paint their well thought out home brew Tools.
I will make and modify Tools when needed but its usually when I am in a jam and need a quick fix tool to get the job done and they do look it. I'll still give them a place in my too cabinet thou.

here is a quick example.... looks like crap but does the job well enough.



Lester
__________________
'62 DuoGlide Mine for 25yrs
'62 Triumph T-Bird in boxes
'83 BMW R100 commuter
'72 Triumph Bonneville Nothing special
'80's couple of Jap chops too

Last edited by Lester; 02-10-2014 at 02:24 PM.
Lester is offline   Reply With Quote
Old 02-10-2014, 05:12 PM   #275
DocS
Senior Member
 
Join Date: Mar 2011
Location: Austin, Texas
Posts: 165
Default Re: Home made workshop tools

Quote:
Originally Posted by Grinder Bill View Post
Same idea, but I used a truck rim and a piece of pipe. There's a foot lever in the base that lowers 4 swivel casters; this raises the unit 1/8", just enough to unload the weight. One handed move with the landing gear lowered...
Hey, Bill, a drawing or photos of that lever linkage would be very much appreciated! I've been kicking around the same concept for my anvil stand but I haven't come up with anything that compact.


Doc
DocS is offline   Reply With Quote
Old 02-11-2014, 10:14 PM   #276
Mr Bill
Senior Member
 
Mr Bill's Avatar
 
Join Date: Feb 2011
Location: Alberta
Posts: 506
Default Re: Home made workshop tools

Doc;

Simple frame, hinged at the back. The foot lever slides under a catch to keep it elevated. The trick to getting it to work correctly is to first shim the base to ride height then fix the components in place.

__________________
No matter how low you sink there's still a right and a wrong, and you always end up choosing.
You go one way so you can try to live with yourself.
You can go the other and still be walking around, but you're dead and you don't know it.
Mr Bill is offline   Reply With Quote
Old 02-13-2014, 06:45 AM   #277
concrete guy
Senior Member
 
Join Date: Aug 2006
Location: IOWA
Posts: 1,104
Default Re: Home made workshop tools

Work in progress. On stand it has 3 axis' and then I plan on making a few mounts that will be on my heavy work bench so I can take it off the stand for heavy wrenching.











concrete guy is offline   Reply With Quote
Old 02-13-2014, 07:51 AM   #278
badassbrutus
Senior Member
 
badassbrutus's Avatar
 
Join Date: May 2008
Location: In a Van down by the river
Posts: 2,220
Default Re: Home made workshop tools

That is Awsome..!!!^^^
__________________
If you like me fine....If you dont Fuck You.

AKA...Hemi Head
badassbrutus is offline   Reply With Quote
Old 02-13-2014, 08:06 AM   #279
Richard D
Senior Member
 
Richard D's Avatar
 
Join Date: Mar 2007
Location: Texas City, TX
Posts: 1,380
Send a message via Yahoo to Richard D
Default Re: Home made workshop tools

Quote:
Originally Posted by old.wrench View Post
Could you give some dimensions? I can't really tell how it works.

I have always liked the '36 Ford spare tire ring as a fender trick, so I got a Packard tire ring, which is nice because it has a piece of stainless trim around it. It has the right width for my tire, but it's too big in diameter. Your tool will reduce the diameter, without making it wider, am I correct?
Richard D is offline   Reply With Quote
Old 02-14-2014, 10:39 PM   #280
old.wrench
Senior Member
 
old.wrench's Avatar
 
Join Date: Dec 2008
Location: corner of walk and don't walk
Posts: 1,719
Default Re: Home made workshop tools

Richard D.

When using the "fender tweeker" tool (or two 2 X 4's used as levers) to tighten a fender radius, you're always going to gain some on the fender width. When using 2 x 4's, I've always ended up spreading the fender quite a bit because you end up pushing right near the fender's edge. With the "tweeker" you can apply the force closer to the fender's center or crown because you can trap the fender in place, so it can't move away from you when you apply the outward pressure.

The fender in the picture is stamped "Made in England" and it started out 31-1/2" from tip to tip and 6" wide. After working it in the "tweeker" a bit, it now measures 29" from tip to tip and 6-1/4" wide. Just right for the Pan project I've been working on .

Not sure which dimensions you'd like, but here are a few of them -

The two long arms are about 4 foot long (long enough to give some serious leverage). The bottom arm is stationary, and the top arm pivots. The pivot point on the top arm is 6" measured from the end. The pivot is a 1/2" bolt and it's adjustable for height with 3 holes drilled at 3", 4", and 5" to the centers, measured up from the bottom of the lower leg. The hardwood "shoes" that contact the fender are 3" long x 1-1/2" x 1-1/2" (approx.) and contoured to match the fender profile. The shoes bear on the pivot arms and are backed up with an angle iron clips that in turn are bolted to the arms. That L-shaped bracket that traps the fender in place and keeps the fender from pushing away or up also can be adjusted by sliding it and locking it down with a bolt. I'm pretty sure I've managed to make this thing sound a lot more complicated than it is . It's simple to build out of scrap and odds and ends, and it's real easy to use. It'll work on fenders from 4-1/2" to 8" wide.

Geo.
__________________
"it ain't rocket surgery"

"hony swacky mally asbestos"


old.wrench is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 11:04 AM.