The Jockey Journal Board - View Single Post - BSA Wont Start - No Power after backfire
View Single Post
Old 12-29-2014, 05:46 PM   #11
Junior Member
Join Date: Dec 2014
Location: Cape Cod Ma
Posts: 6
Default Re: BSA Wont Start - No Power after backfire

Okay, so I've got it sorted out.

Its a positive ground so the battery was in correctly.

I had left two wires connected to the zener diode grounded. I disconnected them from the diode and took them off the ground(redundant, I know) and I've got power without blowing fuses.

Kicked it over and it fired a few times. If it wasn't 30 degrees and dark out I'd continue but for now I am satisfied.

Thanks for the help. You'll probably hear from me soon.


PaulWallace is offline   Reply With Quote