The Jockey Journal Board - View Single Post - Pinstriping one shot question??
View Single Post
Old 12-03-2012, 05:18 PM   #16
FlameThrower
Senior Member
 
FlameThrower's Avatar
 
Join Date: Feb 2010
Location: Doylestown, Ohio
Posts: 298
Default Re: Pinstriping one shot question??

Quote:
Originally Posted by BigNick1959 View Post
If this was 10 years ago I would say don't clear it, but the new 1-Shot red is just shit! it will turn flat on you in about 6 weeks. I have my stripes cleared with HOK clears all the time (1-Shot lines let sit 24 hours) The key as others have said here are dry coats (Real dry!!) untill you get a build up over the lines then some medium coats. If you are using an enamal clear you should be OK, but still build up slowly. Since you didn't thin the 1-shot (which helps it cure) I wouldent clear it for a week, or you can blast it with a heat lamp or the best is to set it in the sun for a couple days.

Good Luck!
I gotta say that I lay wet coats over HOK striping enamel almost immediately after they have cured... never lifts or does anything weird. One-Shot is the standard of the industry... but the HOK striping enamels really are great.

www.flamethrowercustoms.blogspot.com
www.flamethrowercustoms.com
FlameThrower is offline   Reply With Quote