The Jockey Journal Board - View Single Post - Home made workshop tools
View Single Post
Old 11-06-2010, 06:44 PM   #110
knuckleworks
Senior Member
 
knuckleworks's Avatar
 
Join Date: Nov 2010
Location: sweden/kristinehamn/wärmland
Posts: 790
Default Re: Home made workshop tools

adjust the adjuster so that the lower bearing assembly barely cleares the upper and align it as good as you can,


then spot weld the lower bearing mount to the adjuster

and remowe the bearings,use a scrap piece cut to 25mm to make sure the lower brackets stay in place,weld solid,and grind to desired finnish,now you can measure the upper bearing for the grooves
and machine them

desmantle and paint and refit all components
it shoul look something like this (maybe better)
knuckleworks is offline   Reply With Quote