Deep Six Cycles: Handle bars, Brass Foot Pegs, etc

[TuffLuckTom]

Ok guys I know alot of people around here are turning out some killer parts. This is what I have been up to. Sorry guys I just can't offer the discount right now hope you understand...

Brass foot pegs. $185 for a full set. Which includes 2 foot pegs, One toe shift peg and one brake peg. Foot pegs are tapped 1/2'' x 13 (for male adapters available from Flyrite. NOT Included.) Toe shift and brake come tapped 5/16" x 18. Any common thread is available upon request though.
$80 For a pair of foot pegs.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/CopyofHPIM0897copy.jpg


The Ankle Impaler
http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0900copy.jpg

Window bars- STD and TRI $100 raw, plus $25 for powder coating, or an extra $102 for chrome. All the bars are .120 dom tubing. Available in 1" or 7/8". Custom dimensions, pull down/ pull back available. And all bars come knurled now.


STD Win Bars.

10" rise. 22" across.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0878-1.jpg


STD Win Bars 6" rise 22" across.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0931.jpg


Std Win Bar: 4" Rise, 22" across.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0932.jpg

Tri Win Bars: 10" Rise 22" Across

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0952.jpg

Tri Win Bars. 10" Rise 22" Across.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Untitled-1.jpg


Tri Win Bars 4" Rise 22" Across.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Untitled-2.jpg


Hour glass bars. 10" rise 22" across $125 raw. Add $25. $102 for chrome.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0979-1.jpg

6" Long Brass shift knobs. Vary in design but based on these. $40


http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0709.jpg


I'll be adding more products to the line up soon. All these are made in house so if you want something like what you see but slightly different shoot me a line. Every thing is made to order any how so its not hard to put a little twist on a design.

[TuffLuckTom]

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0712.jpg

[TuffLuckTom]

I can do any thing you need for Z Bars too!

[TuffLuckTom]

We have T Shirts available 15$ a piece. Send me a message for sizes. Most are instock.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/DeepSixTshirt.jpg
The ladys shirts are now pink on white. Also $15

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/1-1.jpg

[TuffLuckTom]

Here are a couple shirts put to good use! A much better pic of them than the first one...

http://i11.photobucket.com/albums/a187/SuicideRide/HPIM0744.jpg

[billyd]

Tom's work is top notch! I got a set of pegs, shifter pegs, and kicker pedal for my Triumph, and DAMN! Thanks Tom! Pleasure doing business with you and will definitely be hitting you up for some more work on my other projects. I'll post pics as soon as I get them mounted and ready to rock.

[TuffLuckTom]

We have a tig in house and are willing to make just about anything you want for bars. If your local and need mounts welded up we take our time and do it right! I have never cared for the saying "we do it nice because we do it twice"... Meeting more local (and non) JJer's all the time and loving it!

[luke wl.]

I can vouch for tom and his work! He did my seat mounts yesterday and even though my parts were WAY off, he made them work AND made them look like they were meant to work. Also grabbed a set of drag bars and I will be going back for my fender next week! Great to meet you, see you soon.

[TuffLuckTom]

Thanks for the comments guys! Can't wait to do more work with you!

[TuffLuckTom]

Hey guys we have got a new blog in the works! Just thought I would spread the word! Thanks to every one that checks it out!!!

http://deepsixcycles.blogspot.com/

[TuffLuckTom]

My tank with Deep Six Cycles flush mount sight glass bungs. And in In house spun bottom welded end exit petcock. Some day I will get around to moving the filler.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM1154.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Internet%20posting%20junk/HPIM1046.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Internet%20posting%20junk/HPIM1047.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Internet%20posting%20junk/HPIM1042.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Internet%20posting%20junk/HPIM1048.jpg

[TuffLuckTom]

Also did this tank a few weeks ago for a customer. And managed to take some snap shots before it disappeared. Labor for a job like this is $135-160 depending on whos bungs are used and exactly what we end up doing.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM1147.jpg
http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM1134.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM1135.jpg

[TuffLuckTom]

Some Shots of our Brass foot Pegs. Made and polished in house (read in the USA!).

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/IMG_1802.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/IMG_1806.jpg



All of our bars available in 1" or 7/8". The Win Style & Hourglass bars are available with pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost! And I might point out this also means Made In The USA!

Our Hourglass bars.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Picture062.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/HPIM0979-1.jpg


Tri Win Bars.

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/6inTriWinBars.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/10inTriWinBars.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/8inTriWinbars30degreepulldown.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/8inTriWinbars15degreepulldown.jpg




Here are some of our Win Bars

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/4inWinBars.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/4inWinBars1.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/10inWinBars.jpg




Og Hooligan Bars!

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Picture050.jpg



Here are a mid stack (10" I believe) of our Tri Zee's installed on a customers bike. (Thanks for sending us a pic!).

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Trizbar1.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Trizbar3.jpg

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/Trizbar2.jpg

And check out our Blog (Its waaaay better than our web site!!!)

http://deepsixcycles.blogspot.com/

[luke wl.]

Tom! hope all is well. I ended up moving to NYC (than colorado) hence the not coming by.

Cant say enough about this guy, great work and even better work ethic. Good peoples.

[TuffLuckTom]

Tom! hope all is well. I ended up moving to NYC (than colorado) hence the not coming by.

Cant say enough about this guy, great work and even better work ethic. Good peoples.

Its no big deal. No worries! It was a pleasure to work with you man. Any time you find your self in the area feel free to swing by! I would like to see that Triumph again. It was a neat build and a hell of a first project! Good luck in your endeavors. Stay safe in NYC and keep your head on a swivel! I got a lot of stories from the 4yrs I lived there in the late 90's...

Tom

[TuffLuckTom]

Deep Six Cycles are now manufacturing Brass Hand Grips! Made entirely in house here in Ashville, NC. You know what that means 100% Made In The Usa! Available Raw or Polished to the hilt for 1" or 7/8" bars. These Grips can be made specifically to fit internal or conventional throttle set ups. For the best fit and finish possible send us your conventional throttle assembly and a custom set of grips will be custom fit to your assembly!

My email won't notify my when I get a pm here. I tried to fix it thought I did and well just email me for the fastest response! DeepSixCycles@gmail.com I don't get the lurking time I used too... Btw Msrp on the grips (Polished) is $185. Thanks for looking!

http://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/BWBronzeGripcopy.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/SinglePegD6S.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/DSC_0166.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/DSC_0095.jpghttp://i11.photobucket.com/albums/a187/SuicideRide/Deep%20Six%20Cycle%20Goods/DSC_02291.jpg

[Am-Iron]

I just got my pegs from Tom, (ankle impalers) They are top notch! I usually make my parts and don't buy many but when I go these I was glad I did! I will gladly buy from again. Thank you.

[TuffLuckTom]

Hey I just wanted to let every one know we will be changing our pricing on some stuff after May 1st. Im still trying to keep prices down as much as I can for you guys. After the price change we still will not the most expensive on the market even after adding all the bells and whistles we offer. Check out the blog for details...

http://deepsixcycles.blogspot.com/

[Scorcher]

Do you need any peg adapters????


-Jason

[noodelz]

Those Hourglass bars are fuckin DOPE!

[TuffLuckTom]

Do you need any peg adapters????


-Jason

Yes and no... When I first started I sold them with your adapters or referred my customers to you. Now I machine my own. But I would rather stand at the Lathe than the mill... Oh well.

[TuffLuckTom]

I have been working on this online store. Its got a long ways to go but check it out if you have a minute.

http://deepsixcycles.bigcartel.com/category/deep-six-cycles-products

[TuffLuckTom]

So I been f-in off all damn summer and finally whipped a few new things out!


Brass Shift Knobs starting at $40!

http://jockeyjournal.com/forum/[IMG]http://4.bp.blogspot.com/-M_EIr8lNfrU/Tinu6o98iXI/AAAAAAAAAiU/38MRIf7k_Jk/s320/HPIM1738.JPGhttp://4.bp.blogspot.com/-M_EIr8lNfrU/Tinu6o98iXI/AAAAAAAAAiU/38MRIf7k_Jk/s320/HPIM1738.JPG


http://jockeyjournal.com/forum/[IMG]http://4.bp.blogspot.com/-uYY4Sh7hf8w/Tinu7FKheaI/AAAAAAAAAiY/A9HLiMhfftU/s320/HPIM1746.JPGhttp://4.bp.blogspot.com/-uYY4Sh7hf8w/Tinu7FKheaI/AAAAAAAAAiY/A9HLiMhfftU/s320/HPIM1746.JPG



And we have a little contest going on! Name these pegs and we will give you 10% off one of our products! Check out the blog for details!

http://jockeyjournal.com/forum/[IMG]http://3.bp.blogspot.com/-_pSaqNivhZU/TitDTQVLbSI/AAAAAAAAAic/jWlzcYVs1w0/s320/HPIM1760.JPGhttp://3.bp.blogspot.com/-_pSaqNivhZU/TitDTQVLbSI/AAAAAAAAAic/jWlzcYVs1w0/s320/HPIM1760.JPG

http://deepsixcycles.blogspot.com/